Every card is real. Held for you in a secure U.S. vault.
Checked Nov 4, 2026 · 4 min

TAG Grading Explained: 1,000-Point Score, DIG Report, Scale and Slabs

At a glance

TAG pairs stereoscopic optical imaging with a 1-to-10 grade, an optional 1,000-point score and a scannable DIG report on clear acrylic slabs.

Technical Authentication & Grading (TAG) approaches trading card grading through optical measurement rather than subjective loupe inspection alone. Developing multi-patented imaging hardware since 2015, TAG captures each card with photometric stereoscopic cameras and machine-learning software to map centering, corners, edges and surface topography before human specialists verify authenticity and encapsulation. See how TAG compares alongside traditional rooms in our PSA vs CGC vs BGS vs SGC comparison.

Optical imaging and scale

Every card graded by TAG receives a familiar 1-to-10 grade, using half-point increments from 1 Poor (100–149) through 8.5 Near Mint-Mint+ (850–899). Above Mint 9 (900–949), TAG omits the 9.5 half-step entirely and crowns its ladder with two distinct 10 tiers: Gem Mint 10 (950–989) and Pristine 10 (990–1,000).

Because optical sensors measure border widths to fractions of a millimeter and map surface depth across multiple lighting angles, identical defects receive identical deductions regardless of the day or shift. Human specialists remain in the loop at intake and final review to confirm genuine card stock, verify variant checklists, ensure card thickness eligibility and inspect final slab quality before shipping.

TAG top grade bands

TAG gradeScore bandScale details
Pristine 10990–100051/49 front; 52/48 TCG or 54.5/45.5 sports back
Gem Mint 10950–989Standard top 10 tier above Mint 9 (no 9.5 step)
Mint 9900–949Clean corners with minor centering or surface variance
NM-MT+ 8.5 & below100–899Half-point steps from 8.5 down to 1 Poor

From official TAG Grading scale and submission pages, checked Nov 4, 2026.

The 1,000-point score

In traditional human-graded populations, a borderline Gem Mint slab and a dead-centered showpiece carry the exact same label. On TAG's Standard tier and higher, the slab header adds a three-digit TAG Score from 100 to 1,000 that ranks the copy against every scored card of that issue in TAG's database.

Two Gem Mint 10 slabs illustrate why collectors read the three-digit figure closely: a 951 cleared the 950 Gem Mint cutoff by one point, whereas a 988 fell two points shy of 990 Pristine. Entry grade-only tiers print the 1-to-10 grade without the overall 1,000-point number, and adding a three-digit score later requires resubmitting under a scored service tier. One automatic upgrade applies to every order: any card that qualifies for Pristine 10 (990–1,000) receives full 1,000-point scoring and leaderboard ranking at no extra charge.

Digital imaging report

Instead of inserting a paper flip above the card, TAG laser-etches card identification, grade and a Proof QR code directly into the upper acrylic header. Scanning that code opens the card's permanent Digital Imaging and Grading (DIG) report in any browser, linking the physical holder directly to its underlying measurement record so buyers never have to guess why a card received a 9 instead of a 10.

Grade-only submissions receive a streamlined report with high-resolution front and back scans, exact left-to-right and top-to-bottom centering ratios, and itemized DINGS callouts marking the primary corner fills, edge specks or surface lines that set the grade. Scored submissions unlock eight separate front and back sub-metrics covering front centering, back centering, front corners, back corners, front edges, back edges, front surface and back surface, alongside interactive stereoscopic depth views, downloadable high-definition studio images and chronological population rank.

Pristine rules and clear slabs

Earning a TAG Pristine 10 demands measurable symmetry across both faces. Per TAG's published Pristine standard, front centering cannot exceed 51/49 on either axis, while back centering must stay within 52/48 on trading card games like Pokémon and One Piece or 54.5/45.5 on sports cards. Surface, corners and edges must remain virtually flawless under high-resolution depth imaging, a bar cleared by fewer than one in 100 cards graded by TAG. Compare how top Pristine holders stack up across companies in our PSA 10 vs BGS 9.5 vs CGC Pristine 10 guide.

TAG encapsulates standard-sized 1989-to-present cards (up to 50pt thickness) inside archival, UV-protected clear acrylic holders engineered to fracture cleanly if pried open rather than resealing cleanly. Before mailing raw cards to TAG, inspect eligibility carefully because vintage pre-1989 stock, non-standard oversized cards, die-cuts and booklet cards sit outside TAG's automated optical fixture dimensions. Always scan the laser-etched Proof QR code on any slab and compare the card's holo pattern and border widths against the DIG studio scan using the steps on our Is It Real verification page.

Flat fees and turnaround

Unlike graders that scale fees by post-grading card price or issue post-grading upcharges on high-value cards, TAG charges flat per-card rates tied strictly to turnaround speed and whether the 1,000-point Score is included. Checked against TAG's official submission page on November 4, 2026, the entry grade-only tier starts at $29.95 per card with a 10-card minimum and an estimated 90-business-day turnaround. Check TAG's live submission page right before ordering, as service-level availability can open in limited submission windows.

Full 1,000-point scoring and eight-metric DIG+ reporting are included from TAG's Standard and Priority scored tiers up through Premier at $299.95 per card (estimated 3 to 5 business days, checked November 4, 2026), with optional submission kits that supply pre-cut packaging for safe transit to TAG's California facility. Because TAG publishes every DIG report permanently online alongside global population and chronological rankings, buyers and sellers can inspect the exact centering ratios and surface maps before agreeing on any trade. Review every company's current pricing side by side in our card grading costs and turnaround times guide.

Questions

What is the TAG 1,000-point grading score?
The TAG Score is a three-digit measurement from 100 to 1,000 generated from photometric stereoscopic imaging. Paired with the standard 1-to-10 grade on scored tiers, it shows exactly where a card sits inside its grade band, such as a 951 Gem Mint versus a 988 Gem Mint.
What does the TAG DIG report show?
Accessible by scanning the laser-engraved Proof QR code on any TAG slab, the Digital Imaging and Grading (DIG) report displays high-definition front and back imagery, exact centering measurements, itemized DINGS defect callouts, population rank and eight category scores on scored submissions.
Why is there no 9.5 grade on the TAG scale?
TAG uses half-point steps from 1 up to 8.5, then moves directly from Mint 9 (900–949) to Gem Mint 10 (950–989) and Pristine 10 (990–1,000). Instead of a broad 9.5 bucket, the three-digit TAG Score records exact condition separation.
How rare is a TAG Pristine 10?
According to TAG's published grading scale, fewer than one in 100 graded cards earn Pristine 10 (990–1,000). A card must measure no worse than 51/49 on front centering and 52/48 on TCG backs (54.5/45.5 on sports backs) with virtually flawless corners, edges and surface.
Every card is real.

Real trading card packs, ready to open.

Browse packs